Fluid Level Sensor

R3,355.00

The Fluid Level Sensor helps maintain awareness of tank level by sharing fluid level data with any compatible display connected to the NMEA 2000® network. It can be configured for fuel, oil, live well, fresh water, gray water and black water tanks using compatible Lowrance displays.

Fluid Level sensor w/ 10′ cable and T-connector.

REPLACED THE EP-65R.

Enquire Now

    SKU: 10-09-112 Categories: , ,

    Fuel Flow Sensor Gasoline only. One required per engine. Up to 3 engines supported. To get data on Fuel Remaining in the vessel tanks requires a 000-11522-001 Fuel Data Manager.

    Outputs

    • Fuel Flow
    • Tank Fuel Used
    • Trip Fuel Used
    • Seasonal Fuel Used

    Specifications

     

    Cable Length 10 Ft
    Fuel Line Diameter 3/8″ (9.5 mm) Inside Diameter
    Flow Rate Measured Optimized for 0.6-45 Gal/hr but can measure outside these values
    Added Back Pressure to the fuel system 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
    Installation Location Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line
    Package contents Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps
    Fuel Type Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems.
    Hole required to route through a bulkhead 22mm (7/8″)
    Multiple Fuel Flow sensors possible Yes

    Comes With

    10-09-073

     

    N2K-T-RD

    		 N2K T-Joiner

    N2K-T-RD – Micro-C T-connector for connection of an additional network device

     

    Share This